OptiBrush Bartex

Recommended Uses

Recommended for indoor and outdoor commercial use at entryways, in lobbies, at front desks or anywhere you want to display your company logo, slogan, artwork, or message to customers/visitors or employees. Excellent for scraping action.

Available Sizes

60 x 85 cm

75 x 85 cm

80 x 120 cm

85 x 150 cm, 85 x 300cm

120 x180 cm, 120 x 200 cm, 120 x 240 cm

150 x 200 cm,150 x 300 cm

Special sizes available.

Maximum size: 200 x 1000 cm or 240 x 550 cm

Specifications

• YARN: Coarse Continuous filament Solution Dyed Nylon.
• YARN WEIGHT: 1,300 g/m².
• PILE THICKNESS: 10mm.
• TOTAL WEIGHT: 5,20 kg/m².
• PRIMARY BACKING: Polyester Spun bound Non-woven Fabric 120g/m².
• RUBBER BACKING: 100% Nitrile EXS™ rubber with high UV resistance and high resistance to carbon bleeding. Compression-molded with claw backing for excellent dimensional stability.
• BORDER THICKNESS: 2.9mm
• BORDER WIDTH: 1.5cm
• SIZE VARIANCE: +/- 2%

Laundering Instructions

1. 1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
   2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
   3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
   4. Rinse, 2 Min. on a high water level with cold temperature
   5. Rinse, 2 Min. on a high water level with cold temperature
   6. Extract on low speed, 1-2 Min.
   7. Shake out with the drum turning, 1 Min.
   8. Extract, on a maximum of 250G, 3-5 Min.
   9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
   10. Cool down, 5 Min.

   Additional Recommendations:

   • It's recommended that Optibrush mats are washed separate from other mats.
   • Optigraphic & Diplomats can be washed together with other SDN mats.
   • For Heavy Soiled Mats, increase temperature up to max. 71°C.
   • Break should not exceed pH of 9,5; use low pH non-ionic detergents.
   • Do not overdry mats; Basket-temperature of dryer should not exceed 82°C.
   • If mats are not dried, final rinse can be increased to 49°C. This will reduce moisture retention following extraction.
   • Lay Mats flat following removal from washer; allow mats to cool before rolling.

Cleaning Instructions

Optibrush mats can be cleaned in several different ways.

1. They can be commercially laundered (see Laundering Instructions)
2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
3. Cleaned with an extractor, or hosed off as necessary to remove heavy soil.

Hang to dry.Mats should always be dry before they are placed back in service.