Description
Heavy Duty 20L Concrete Imprint Sealer Wet Look Finish, One-Coat Application
Description:
20L Block Paving Sealer Wet Look – Heavy Duty & Fast Drying | SlipNots
Upgrade your block paving with SlipNots 20L Heavy Duty Concrete Imprint Sealer—the professional’s choice for long-lasting protection and a fresh wet-look finish. This premium, solvent-based polyurethane sealer is engineered to rejuvenate tired paving while delivering a durable, high-impact result.
Key Features:
Fast-curing, polyurethane hard-set formula
Creates a clear, semi-finish wet look
One-coat application (second coat optional depending on surface porosity)
Easy to apply with a roller or brush
Covers up to 120m² per 20-litre drum
Surface dry in approx. 2 hours (15–20°C)
Benefits:
Revives faded paving with a fresh, glossy finish
Resists oil, grease, and dirt stains
Reduces moss and algae growth
Helps prevent block sinking and sand loss between joints
Extends the lifespan of your paving
Cost-effective alternative to full driveway replacement
Application Instructions:
Surface must be clean, dry, and free from oil, algae, and debris
Apply with roller or brush in dry, well-ventilated conditions
Avoid high humidity or damp weather during application
Recoat only after 8 hours if needed
Full cure required before foot or vehicle traffic
Safety & Usage Notes:
Wet look finish may be slippery when wet or in winter
For external use only—do not discharge into drains or watercourses
Not suitable for Indian or sandstone paving; always spot-test first
Clean equipment with white spirit after use
Legal Disclaimer:
All SlipNots products are intended for use as specified. SlipNots is not liable for misuse or accidents resulting from improper application. Product advice is provided in good faith, but without legal warranty.
