Description
Industrial Concrete Floor Paint PU150 Polyurethane Heavy Duty Semi-Gloss for Factory & Garage Floors
Description:
SlipNot’s PU150 Heavy Duty Polyurethane Concrete Floor Paint – 5L / 10L / 20L
Ideal for Factory Floors, Warehouses, Showrooms, and High-Impact Areas
SlipNot’s PU150 is a premium-grade polyurethane floor paint designed for high durability in light commercial and domestic settings. For extreme industrial performance, consider upgrading to the PU350 range.
Key Benefits:
Heavy-Duty Protection: Withstands forklifts, pallet trucks, 4x4 vehicles, and static pallet stacking.
Chemical & Spill Resistance: Resilient to water, oils, brake fluids, engine coolants, soft acids, and cleaning agents (Note: spills must be cleaned promptly).
Abrasion Resistance: Reinforces and strengthens concrete floors while resisting surface wear and dusting.
Enhanced Work Environment: Improves appearance, cleaning efficiency, and reduces contamination and dust.
Clear Safety Marking: Helps delineate walkways, zones, and safety paths.
Application Guidance:
Coverage: ~10m² per litre (107ft²)
5L = 50m², 10L = 100m², 20L = 200m² (single coat)
Drying Time:
Touch dry in 10–12 hours @15°C
Recoat after 24 hours
Fully cured in 7 days
Surface Compatibility:
Concrete, Wood, Brick, Stone, and Metal – Yes
Power-floated/Screeded Surfaces – Requires acid etch or abrasion before painting
Matt Tiles – Yes if clean and dry
High Gloss Tiles / Lino / Bitumen – Not recommended
Surface Prep Essentials:
Dusty / Virgin Concrete: Use SlipNot’s Pre-Seal to stabilize surface
Oily / Contaminated Floors: Clean thoroughly with SlipNot’s Deep Clean, then apply Pre-Seal
Rising Damp: A damp-proof membrane or coating is required prior to application
Finish & Gloss Level:
Semi-Gloss Finish: Not high gloss, reducing slip hazards
Fills Fine Cracks Only: Use a filler for large gaps
Frequently Asked Questions:
Is it waterproof?
No – this is not a waterproof coating.
Can I paint a 4-week old slab?
No – wait at least 12 weeks before painting.
Will it work on tiles?
Yes, if the tile has a matt finish and is clean and dry.
What if I’ve never painted a floor before?
No problem – we’re happy to guide you through each step.
Testing for Readiness:
Place water on the surface:
If it absorbs: Ready for coating
If it beads or puddles: Acid etching or abrasion is required
Product Sizes & Weights:
5L – Covers 50m² | 6kg
10L – Covers 100m² | 12kg
20L – Covers 200m² | 23kg
Important Notes:
Always mix thoroughly before use (use a drill/paddle tool).
Apply two thin coats, allowing full drying time between layers.
Perform a small patch test to check for contamination or moisture.
Avoid use if floor lacks a damp-proof membrane.
