Description
SlipNot's PU350 Heavy-Duty Floor Paint – Garage, Warehouse, Factory Use
SlipNot’s PU350 Supercoat Polyurethane Floor Paint is our premium, heavy-duty industrial coating – engineered for extreme performance on concrete, metal, and high-impact surfaces. Designed for garages, warehouses, factories, workshops, and more. Available in 5L, 10L, and 20L with fast UK delivery.
Key Features:
-
Heavy-duty polyurethane resin-based floor coating
-
High abrasion and impact resistance for vehicles, pallet trucks, forklifts, 4x4s
-
Chemical resistant to oils, water, coolant, brake fluid, and more (short exposure)
-
Semi-gloss finish (not high-gloss – safer underfoot)
-
Rapid curing: touch-dry in 10 hours at 15°C, fully cured in 7 days
-
Up to 200m² coverage per 20L can (based on single coat)
-
Ideal for concrete, stone, brick, metal, and timber (not suitable for lino/bitumen)
-
Easy to clean, dust-resistant, improves workspace hygiene
-
Made in the UK by SlipNot's – trusted professional coatings supplier
Perfect For:
-
Industrial warehouses
-
Commercial garages
-
Car workshops
-
Showrooms
-
Storage units
-
Factory production floors
-
Loading bays
Surface Compatibility & Prep Advice:
-
Concrete must be fully cured (minimum 12 weeks from pour)
-
Power-floated/smooth concrete? Acid etching or mechanical abrasion required
-
Dusty or virgin surfaces: Use SlipNot’s Pre-Seal Primer first
-
Oily or contaminated surfaces: Deep clean and degrease before painting
-
Rising Damp: Floor must have an intact DPM. Test using plastic sheet method (see below)
-
Not suitable for: Linoleum, bitumen, or glossy tiles
Preparation & Application Steps:
-
Clean thoroughly – degrease and remove dust, oil, or debris
-
Repair cracks with appropriate filler
-
Apply SlipNot’s Pre-Seal for dusty or porous areas – let dry 12–24 hrs
-
Mix PU350 thoroughly using a paddle/drill tool
-
Apply two thin coats – allow 24 hrs between coats
-
Touch dry in ~10 hours at 15°C, traffic-ready after 3 days
-
Full cure in 7 days – avoid heavy use or washing before then
Note: Always perform a test patch. Avoid coating if moisture is present – check using the plastic sheet test (tape a 30cm x 30cm clear sheet down for 24 hours; check for condensation).
Coverage Guide:
-
5L = up to 50m² (one coat)
-
10L = up to 100m² (one coat)
-
20L = up to 200m² (one coat)
(Two thin coats recommended for durability.)
Weight:
-
5L: ~6kg
-
10L: ~12kg
-
20L: ~23kg
FAQs (Shortened for Shopping):
-
Power-floated floor? – Yes, but acid etch first
-
New concrete? – Wait 12 weeks before coating
-
High-gloss finish? – No, semi-gloss only (safer)
-
Waterproof? – Not a waterproofing product
-
Tiled floor? – Matt tiles only, clean and dry
-
Will it fill cracks? – No, use floor filler beforehand
SlipNot's PU350 is a professional-grade, fast-drying floor coating built for performance, safety, and durability in the harshest environments.
