Description
Industrial-Grade SBR Rubber Sheeting
Premium 70° Shore A rubber engineered for gaskets, seals & industrial applications
70° Shore A Hardness
Perfect balance of flexibility for gaskets & structural strength for seals and packing
Chemical Resistant
Compatible with water, diluted acids, alkalis & most industrial chemicals
Cut to Length
Sold per linear metre (0.5m min, 10m max) – zero waste, no minimum order quantities
Wide Temp Range
Performs -30°C to +70°C continuous (up to +90°C intermittent)
Why Engineers Choose Our SBR Rubber
Manufactured to BS 2752 / ASTM D2000 standards, our premium SBR rubber delivers exceptional durability and reliability for critical industrial applications.
- ✓High Tensile Strength: ~3 MPa with 200% elongation – resists tearing, stretching & deformation under stress
- ✓Excellent Abrasion Resistance: DIN 53516 tested – lasts 10-15 years in industrial environments
- ✓Good Compression Set: Maintains seal integrity for years under normal gasket compression (25-30%)
- ✓Easy Fabrication: Smooth surface finish – cuts, drills & punches with standard tools
Industrial Applications
Water pumps, flanges, pipe joints, tank lids
Machine mounts, equipment pads, anti-vibration washers
Waterproof lining for water tanks & chemical storage
Waterproofing, expansion joints, sound insulation
Hatch seals, porthole gaskets, dock bumpers
Vehicle seals, engine gaskets, load bed liners
Thickness Selection Guide
1.5mm-3mm – Light-Duty Gaskets
Best for: Low-pressure applications, thin gaskets, waterproofing membranes
4mm-6mm – Standard Gaskets & Seals
Best for: Most gasket applications, moderate-pressure seals, vibration pads
7mm-12mm – Heavy-Duty Applications
Best for: High-pressure seals, uneven surfaces, machine mounts, packing pieces
15mm-25mm – Maximum Gap Filling
Best for: Large gaps, extreme vibration dampening, structural packing
Technical Specifications
| Material | SBR (Styrene-Butadiene Rubber) – Natural & Synthetic Blend |
| Hardness | 70° Shore A (±5) |
| Tensile Strength | ~3 MPa (300 psi) |
| Elongation at Break | ~200% |
| Temperature Range | -30°C to +70°C continuous (up to +90°C intermittent) |
| Width | 1.4m (1400mm) standard |
| Thickness Options | 1.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm |
| Colour | Black |
| Surface Finish | Smooth both sides |
| Standards | BS 2752 / ASTM D2000 |
| Lifespan | 10-15 years (indoor industrial environments) |
Industrial Quality Guarantee
Trusted by UK engineers, manufacturers & contractors for 15+ years
Cutting Guide: 1.5mm-6mm: sharp scissors or utility knife | 7mm-15mm: heavy-duty utility knife, score multiple times | 16mm-25mm: Stanley knife or band saw
Installation Tip: For gaskets, compress to 25-30% of original thickness for optimal seal. Use contact adhesive for bonding to metal, wood, or concrete.
Browse More: View our full rubber flooring range or read our rubber flooring guide for expert advice.
