Playground Mats UK | BS EN 1177 Certified Safety Surfacing | Free Delivery

Showing 1 - 3 of 3 products

📖 Not sure which to choose? Read our Playground Safety Surfacing Guide for expert advice.

📖 Expert Guide: Before you buy, read our comprehensive Playground Safety Surfacing Guide to find the perfect product for your needs.

📖 Read First: Playground Safety Surfacing Guide 2026 — BS EN 1177 compliance, CFH calculator, thickness guide

Playground Safety Mats: The Complete UK Guide

Playground safety mats are essential for protecting children from fall injuries. In the UK, playground surfacing must comply with BS EN 1177 standards for impact attenuation. Our range of playground safety mats meets and exceeds these requirements, providing certified protection for schools, nurseries, public playgrounds, and residential gardens.

Understanding Critical Fall Height (CFH)

Critical Fall Height is the maximum height from which a child can fall onto a safety surface without risk of life-threatening head injury. UK regulations require impact-absorbing surfacing beneath all playground equipment where fall height exceeds 600mm.

Mat Thickness	Critical Fall Height	Typical Equipment
25mm	1.1m	Toddler play, low platforms
30mm	1.5m	Standard swings, small slides
40mm	2.1m	Climbing frames, larger slides
43mm	2.4m	High climbing structures
55mm	2.9m	Adventure playgrounds
70mm	3.0m+	Maximum protection zones

How to Calculate Required Mat Thickness

Measure the highest point a child can reach on the equipment
This is your Free Height of Fall
Select a mat with CFH rating exceeding this height
Coverage area: extend mats 1.75m minimum from equipment edge (fall zone)

Types of Playground Safety Mats

Rubber Tiles: 500mm × 500mm or 1m × 1m interlocking tiles. Ideal for defined play areas, easy to replace individual damaged tiles. Available in multiple colours for creative playground designs.

Continuous Rubber Matting: Rolls of safety surfacing for larger areas. Seamless appearance, bonded to substrate. Professional installation recommended.

Grass Mats: Rubber tiles designed for installation beneath natural grass. Maintains lawn appearance whilst providing impact protection.

Installation Requirements

For optimal performance, playground safety mats require:

Level, well-drained base (MOT Type 1 or concrete)
Adhesive fixing for tiles over 40mm on hard surfaces
Perimeter edging to prevent mat movement
Regular inspection schedule (monthly recommended)

Compliance & Standards

All our playground mats are tested to BS EN 1177:2018 by independent laboratories. Certificates of compliance available for school and local authority requirements. We also supply to RoSPA guidelines and EN 1176 equipment safety standards.

Frequently Asked Questions

Are your playground mats BS EN 1177 certified?

Yes — all our playground safety mats and tiles are independently tested and certified to BS EN 1177, the British and European standard for impact-attenuating playground surfacing. Each product listing states the certified Critical Fall Height (CFH), which determines the maximum equipment height the surface safely protects against. Our mats cover fall heights from 1.0m up to 3.0m depending on thickness and specification.

What thickness playground mat do I need?

Thickness is determined by the Critical Fall Height of your equipment. As a guide: 40mm mats typically cover fall heights up to 1.5m (suitable under most junior play equipment), 50mm mats cover up to 2.0m, and 75mm-100mm mats cover fall heights up to 3.0m for taller climbing frames and trim trails. Always match the mat's certified CFH to your equipment's highest accessible point. Our product pages state the certified fall height for each mat.

What is Critical Fall Height and how is it measured?

Critical Fall Height (CFH) is determined by BS EN 1177 laboratory testing. A test head containing accelerometers is dropped onto the surface from increasing heights until the Head Injury Criterion (HIC) reaches 1000 — the threshold for life-threatening injury. The maximum safe drop height is the surface's certified CFH. When selecting playground mats, the CFH must equal or exceed the highest accessible point on the play equipment.

Can playground mats be used under swings and climbing frames?

Yes — our playground safety mats are designed for use under swings, climbing frames, slides, and all outdoor play equipment. For swings, the safe surfacing zone extends to twice the height of the suspension point in front and behind. Ensure the mat thickness matches or exceeds the certified CFH for your swing height. Our team can advise on coverage areas and quantities for specific equipment layouts.

How much do playground safety mats cost?

Playground safety mats start from around 29.99 per tile for standard 1m x 1m rubber safety tiles. Pricing depends on thickness, size, and quantity. A typical primary school play area of 50m2 typically costs between 1,500 and 3,500 depending on the required fall height certification. We offer trade pricing for schools, local authorities, and contractors — contact us for a volume quote with free delivery.

Are playground safety mats suitable for schools and nurseries?

Yes — our playground mats are widely used in primary schools, nurseries, nursery schools, and early years settings across the UK. They meet BS EN 1177 safety standards required for OFSTED compliance and local authority playground inspections. They are also non-toxic, splinter-free, and wheelchair accessible, meeting inclusive play area requirements. We supply schools, academies, and local councils directly.

Can playground mats be installed over grass or concrete?

Yes — our rubber playground mats can be installed over grass, soil, concrete, tarmac, and most firm, level surfaces. On grass, ensure the ground is reasonably level and well-drained. On hard surfaces like concrete, the mats can be loose-laid or fixed with adhesive. Interlocking edges keep tiles stable during use. For permanent school installations, we recommend adhesive fixing on hard surfaces for maximum security.

Do you offer free delivery on playground mats?

Yes — free delivery on all playground mat orders to UK mainland addresses. No minimum order required. Larger orders for schools and play areas are typically delivered on a pallet. We confirm delivery method and timescale before dispatch. Most orders dispatch within 24-48 hours, with delivery in 2-4 working days.